[EPA2008b]apache2のインストールと設定
以下では, Apache 2.2 のインストールと設定について記す. サービスとして http と https の両方を提供する.
[EPAサーバ構築ドキュメント へ戻る]
ビルドのための設定
ソースからインストールする. インストール先は apache2 のデフォルト である /usr/local/apache2 とする. この場合, configure へ --prefix の必要は無い. apache-ssl を動作させたいため --enable-ssl を, mod_rewrite を使用したいため --enable-rewrite を (gate の 登録窓口を http から https へ移動させたい), DSO (Dynamic shared object: 動的共有オブジェクト) を使用したいため --enable-so をオプションとして指定した. また, ビルド時に "Cannot use an external APR-util with the bundled APR" とエラーが生じる場合があるため, --with-included-apr オプションも指定する.
# cd /usr/local/src # wget http://www.meisei-u.ac.jp/mirror/apache/httpd/httpd-2.2.9.tar.gz # tar xvfz httpd-2.2.9.tar.gz # cd httpd-2.2.4 # ./configure --enable-ssl --enable-rewrite --enable-so --with-included-apr
configure の結果は config.log や build/config_vars.mk を参照のこと.
なお, apache2 は最新バージョンをダウンロードすればよい. 最新バージョンは<URL:http://www.meisei-u.ac.jp/mirror/apache/httpd/>から確認できる.
※ 2008 年 10 月 8 日時点の最新バージョンは 2.2.9 である.
ビルドとインストール
# make # make install
/usr/local/apache2 以下にファイルがあることを確認する.
インストールした実行ファイルへのパスの設定
インストールされた Apache のバイナリファイル群へパスを通す.
[EPA2008b]パスの設定 の <一般ユーザ用コマンドのパス> に /usr/local/apache2/bin を追加する. (システム用コマンドも一般ユーザ用コマンドと同じ場所に インストールされているため, システム用コマンド用の設定を 別途行う必要は無い).
インストールしたマニュアルへのパスの設定
/etc/manpath.config に以下の行を追加する. 詳しくは [EPA2008b]パスの設定#man 関連のパスの設定 を参照のこと.
MANDATORY_MANPATH /usr/local/apache2/man MANPATH_MAP /usr/local/apache2/bin /usr/local/apache2/man MANDB_MAP /usr/local/apache2/man /usr/local/apache2/man
モジュールの確認, 追加
インストールした apache2 で有効になっているモジュールは
# apachectl -t -D DUMP_MODULES
で確認できる. 最低限,
- ssl_module
- rewrite_module
- userdir_module
を有効にしておくこと. モジュールが足りない場合, DSO(Dynamic Shared Object) を有効にしている (configure 時に --enable-so をつけている)と, 後からモジュールを追加できる. DSO が有効になっているかを確認するには
# httpd -l Compiled in modules: core.c mod_authn_file.c mod_authn_default.c ... mod_so.c <-- DSO モジュール
で mod_so.c が組み込まれていれば良い. DSO が有効になっていない場合には, もういちど configure からやり直し.
後からモジュールを追加する場合には apxs コマンドを使用する. 例えば mod_rewrite を追加する場合には apache のソースに行き,
# cd /usr/local/src/httpd-2.2.8/modules/mapper # apxs -c mod_rewrite.c # apxs -i -a -n rewrite mod_rewrite.la
とする.
設定ファイルの編集
設定ファイルは httpd 用が /usr/local/apache2/conf/httpd.conf, httpd-ssl 用が /usr/local/apache2/conf/extra/httpd-ssl.conf である. また各ユーザの public_html 以下の設定用が /usr/local/apache2/conf/extra/httpd-userdir.conf である. これらを編集する.
変更の要点は以下の通りである.
- httpd.conf
- HTTP デーモンを起動するユーザを www-data にする.
- サーバ管理者 (ServerAdmin) のメールアドレスを設定
- サーバ名 (ServerName) を設定
- サーバのデフォルトルート (DefaultRoot) を /~epalab に設定
- ディレクトリのインデックスファイルに index.html 以外に index.htm index.htm.en index.html.en index.htm.ja index.html.ja も追加.
- エラーログファイルを /var/log/httpd-error.log に設定
- アクセスログファイルを /var/log/httpd-access.log に設定
- CGI に関する設定を変更
- extra/httpd-vhosts.confをロード
- extra/httpd-userdir.conf をロード
- extra/httpd-ssl.conf をロード
- /~gate, および /cgi-bin に対してのアクセスは HTTPS へ移動させる (参考資料 9, 10 参照).
以下の5 つの Hiki 領域 ~epalab/hiki , ~itpass/hiki, ~itpass/hiki-secret, ~cps/for-steering/hiki, ~/tansaku/hiki に関する設定を, 各領域毎の .htaccess により可能にする
(AllowOverride FileInfo AuthConfig Limit Indexes Options=ExecCGI,FollowSymlinks).
- httpd-vhosts.conf
- {aoe,ahs,cps}.scitec.kobe-u.ac.jp宛の接続を受ける(virtual host).
- ドキュメントルートは/home/{aoelab,ahslab,cps}/public_htmlにする.
- www.付きでもアクセスできるようにする.
- 管理者メールアドレスはepaadmin _at_ ... にする.
- http://{aoe,ahs,cps}.scitec.kobe-u.ac.jp/~gate/ 以下にアクセスされた場合には, https://epa.scitec.kobe-u.ac.jp/~gate に飛ばす.
- epa.scitec.kobe-u.ac.jp 宛の接続のときのみ, /hiki, /~epalab/hiki, /~itpass/hiki に対してのアクセスは HTTPS へ移動させる. その際, URI のエンコードは行わない. (参考資料 9, 10, 11 参照).
- {aoe,ahs,cps}.scitec.kobe-u.ac.jp宛の接続を受ける(virtual host).
- httpd-userdir.conf
- 所有者がマッチしなくてもシンボリックリンクの公開を許可する. (SymLinksIfOwnerMatch -> FollowSymLinks).
- httpd-ssl.conf
- ドキュメントルート (DocumentRoot), サーバ名 (ServerName), サーバ管理者アドレス (ServerAdmin), エラーログ (ErrorLog), アクセスログ (TransferLog) の設定.
- ahs.scitec, aoe.scitec, cps.scitec の場合の https 接続を
設定しておく
- 本来は 404 を返すべきなのだが, とりあえず.
オリジナルとの diff は以下の通り.
httpd.conf の diff
# diff -u ./conf/httpd.conf ./conf/original/httpd.conf
--- ./conf/httpd.conf 2009-03-19 14:24:10.000000000 +0900
+++ ./conf/original/httpd.conf 2008-10-08 12:09:09.000000000 +0900
@@ -50,7 +50,7 @@
#
# Example:
# LoadModule foo_module modules/mod_foo.so
-#LoadModule rewrite_module modules/mod_rewrite.so
+#
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
@@ -62,8 +62,8 @@
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
-User www-data
-Group www-data
+User daemon
+Group daemon
</IfModule>
</IfModule>
@@ -85,7 +85,7 @@
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. admin@your-domain.com
#
-ServerAdmin epaadmin_at_epa.scitec.kobe-u.ac.jp
+ServerAdmin you@example.com
#
# ServerName gives the name and port that the server uses to identify itself.
@@ -94,14 +94,14 @@
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
-#ServerName epa.scitec.kobe-u.ac.jp:80
+#ServerName www.example.com:80
#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
-DocumentRoot "/home/epalab/public_html"
+DocumentRoot "/usr/local/apache2/htdocs"
#
# Each directory to which Apache has access can be configured with respect
@@ -115,6 +115,7 @@
Options FollowSymLinks
AllowOverride None
Order deny,allow
+ Deny from all
</Directory>
#
@@ -127,7 +128,7 @@
#
# This should be changed to whatever you set DocumentRoot to.
#
-<Directory "/home/epalab/public_html">
+<Directory "/usr/local/apache2/htdocs">
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
@@ -162,7 +163,7 @@
# is requested.
#
<IfModule dir_module>
- DirectoryIndex index.html index.htm index.htm.en index.html.en index.htm.ja index.html.ja
+ DirectoryIndex index.html
</IfModule>
#
@@ -182,7 +183,7 @@
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
-ErrorLog "/var/log/httpd-error_log"
+ErrorLog "logs/error_log"
#
# LogLevel: Control the number of messages logged to the error_log.
@@ -211,13 +212,13 @@
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
- #CustomLog "logs/access_log" common
+ CustomLog "logs/access_log" common
#
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
- CustomLog "logs/access_log" combined
+ #CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
@@ -264,8 +265,10 @@
# CGI directory exists, if you have that configured.
#
<Directory "/usr/local/apache2/cgi-bin">
- AllowOverride AuthConfig Limit
- Options ExecCGI FollowSymLinks IncludesNoExec
+ AllowOverride None
+ Options None
+ Order allow,deny
+ Allow from all
</Directory>
#
@@ -376,13 +379,13 @@
#Include conf/extra/httpd-languages.conf
# User home directories
-Include conf/extra/httpd-userdir.conf
+#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
-Include conf/extra/httpd-vhosts.conf
+#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
@@ -394,7 +397,7 @@
#Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
-Include conf/extra/httpd-ssl.conf
+#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
@@ -404,26 +407,3 @@
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
-
-#
-# Setting for Hiki Area
-#
-<Directory "/home/epalab/public_html/hiki">
- AllowOverride FileInfo AuthConfig Limit Indexes Options=ExecCGI,FollowSymlinks
-</Directory>
-
-<Directory "/home/itpass/public_html/hiki">
- AllowOverride FileInfo AuthConfig Limit Indexes Options=ExecCGI,FollowSymlinks
-</Directory>
-
-<Directory "/home/itpass/public_html/hiki-secret">
- AllowOverride FileInfo AuthConfig Limit Indexes Options=ExecCGI,FollowSymlinks
-</Directory>
-
-<Directory "/home/cps/public_html/for-steering/hiki-wheel">
- AllowOverride FileInfo AuthConfig Limit Indexes Options=ExecCGI,FollowSymlinks
-</Directory>
-
-<Directory "/home/tansaku/public_html/hiki">
- AllowOverride FileInfo AuthConfig Limit Indexes Options=ExecCGI,FollowSymlinks
-</Directory>
extra/httpd-userdir.conf の diff
$ diff -u original/extra/httpd-userdir.conf extra/httpd-userdir.conf
--- original/extra/httpd-userdir.conf 2008-03-14 22:24:16.000000000 +0900
+++ extra/httpd-userdir.conf 2008-08-25 16:30:58.000000000 +0900
@@ -1,3 +1,4 @@
+# -*- apache -*-
# Settings for user home directories
#
# Required module: mod_userdir
@@ -15,7 +16,7 @@
#
<Directory "/home/*/public_html">
AllowOverride FileInfo AuthConfig Limit Indexes
- Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
+ Options MultiViews Indexes FollowSymLinks IncludesNoExec
<Limit GET POST OPTIONS>
Order allow,deny
Allow from all
extra/httpd-ssl.conf の diff
$ diff -u original/extra/httpd-ssl.conf extra/httpd-ssl.conf
--- original/extra/httpd-ssl.conf 2008-10-08 12:09:09.000000000 +0900
+++ extra/httpd-ssl.conf 2009-06-26 18:36:53.000000000 +0900
@@ -1,3 +1,4 @@
+# -*- apache -*-
#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
@@ -71,15 +72,17 @@
## SSL Virtual Host Context
##
-<VirtualHost _default_:443>
+NameVirtualHost *:443
-# General setup for the virtual host
-DocumentRoot "/usr/local/apache2/htdocs"
-ServerName www.example.com:443
-ServerAdmin you@example.com
-ErrorLog "/usr/local/apache2/logs/error_log"
-TransferLog "/usr/local/apache2/logs/access_log"
+<VirtualHost *:443>
+# General setup for the virtual host
+ DocumentRoot "/home/epalab/public_html"
+ ServerName epa.scitec.kobe-u.ac.jp:443
+ ServerAlias www.epa.scitec.kobe-u.ac.jp:443
+ ServerAdmin epaadmin@epa.scitec.kobe-u.ac.jp
+ ErrorLog /var/log/httpd-ssl-error.log
+ TransferLog /var/log/httpd-ssl-access.log
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
@@ -229,3 +232,35 @@
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost>
+
+<VirtualHost *:443>
+ DocumentRoot "/home/aoelab/public_html"
+ ServerName aoe.scitec.kobe-u.ac.jp:443
+ ServerAdmin epaadmin_at_epa.scitec.kobe-u.ac.jp
+ ErrorLog /var/log/httpd-ssl-error.log
+ TransferLog /var/log/httpd-ssl-access.log
+</VirtualHost>
+
+<VirtualHost *:443>
+ DocumentRoot "/home/ahslab/public_html"
+ ServerName ahs.scitec.kobe-u.ac.jp:443
+ ServerAdmin epaadmin_at_epa.scitec.kobe-u.ac.jp
+ ErrorLog /var/log/httpd-ssl-error.log
+ TransferLog /var/log/httpd-ssl-access.log
+</VirtualHost>
+
+<VirtualHost *:443>
+ DocumentRoot "/home/cps/public_html"
+ ServerName cps.scitec.kobe-u.ac.jp:443
+ ServerAdmin epaadmin_at_epa.scitec.kobe-u.ac.jp
+ ErrorLog /var/log/httpd-ssl-error.log
+ TransferLog /var/log/httpd-ssl-access.log
+</VirtualHost>
+
+<VirtualHost *:443>
+ DocumentRoot "/home/itpass/public_html"
+ ServerName itpass.scitec.kobe-u.ac.jp:443
+ ServerAdmin epaadmin_at_epa.scitec.kobe-u.ac.jp
+ ErrorLog /var/log/httpd-ssl-error.log
+ TransferLog /var/log/httpd-ssl-access.log
+</VirtualHost>
extra/httpd-vhost.conf の diff
diff -u original/extra/httpd-vhost.conf extra/httpd-vhost.conf
--- original/extra/httpd-vhosts.conf 2008-10-08 12:09:09.000000000 +0900
+++ extra/httpd-vhosts.conf 2009-06-29 12:55:37.000000000 +0900
@@ -25,21 +25,100 @@
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
<VirtualHost *:80>
- ServerAdmin webmaster@dummy-host.example.com
- DocumentRoot "/usr/local/apache2/docs/dummy-host.example.com"
- ServerName dummy-host.example.com
- ServerAlias www.dummy-host.example.com
- ErrorLog "logs/dummy-host.example.com-error_log"
- CustomLog "logs/dummy-host.example.com-access_log" common
+ ServerAdmin epaadmin_at_epa.scitec.kobe-u.ac.jp
+ DocumentRoot "/home/epalab/public_html"
+ ServerName epa.scitec.kobe-u.ac.jp
+ ServerAlias www.epa.scitec.kobe-u.ac.jp
+ ErrorLog "/var/log/httpd-error.log"
+ CustomLog "/var/log/httpd-access.log" combined
+
+ <IfModule mod_rewrite.c>
+ RewriteEngine On
+ RewriteLog "/var/log/httpd-rewrite.log"
+ RewriteLogLevel 0
+ RewriteCond %{SERVER_PORT} !^443$
+ RewriteRule ^/hiki/(.*)?$ https://epa.scitec.kobe-u.ac.jp/hiki/$1 [L,R]
+ # ---- hiki
+ RewriteRule ^/~epalab/hiki/(.*)?$ https://epa.scitec.kobe-u.ac.jp/~epalab/hiki/$1 [L,R,NE]
+ RewriteRule ^/~itpass/hiki/(.*)?$ https://epa.scitec.kobe-u.ac.jp/~itpass/hiki/$1 [L,R,NE]
+ # ---- gate
+ RewriteRule ^/~gate/(.*)?$ https://epa.scitec.kobe-u.ac.jp/~gate/$1 [L,R,NE]
+ RewriteRule ^/cgi-bin/(.*)?$ https://epa.scitec.kobe-u.ac.jp/cgi-bin/$1 [L,R,NE]
+ </IfModule>
</VirtualHost>
+# ---- aoelab ----
<VirtualHost *:80>
- ServerAdmin webmaster@dummy-host2.example.com
- DocumentRoot "/usr/local/apache2/docs/dummy-host2.example.com"
- ServerName dummy-host2.example.com
- ErrorLog "logs/dummy-host2.example.com-error_log"
- CustomLog "logs/dummy-host2.example.com-access_log" common
+ ServerAdmin epaadmin_at_epa.scitec.kobe-u.ac.jp
+ DocumentRoot "/home/aoelab/public_html"
+ ServerName aoe.scitec.kobe-u.ac.jp
+ ServerAlias www.aoe.scitec.kobe-u.ac.jp
+ ErrorLog "/var/log/httpd-error.log"
+ CustomLog "/var/log/httpd-access.log" combined
+ <IfModule mod_rewrite.c>
+ RewriteEngine On
+ RewriteLog "/var/log/httpd-rewrite.log"
+ RewriteLogLevel 0
+ RewriteCond %{SERVER_PORT} !^443$
+ # ---- hiki
+ RewriteRule ^/hiki/(.*)?$ https://epa.scitec.kobe-u.ac.jp/hiki/$1 [L,R]
+ # ---- gate
+ RewriteRule ^/~gate/(.*)?$ https://epa.scitec.kobe-u.ac.jp/~gate/$1 [L,R,NE]
+ RewriteRule ^/cgi-bin/(.*)?$ https://epa.scitec.kobe-u.ac.jp/cgi-bin/$1 [L,R,NE]
+ </IfModule>
</VirtualHost>
+# ---- ahslab ----
+<VirtualHost *:80>
+ ServerAdmin epaadmin_at_epa.scitec.kobe-u.ac.jp
+ DocumentRoot "/home/ahslab/public_html"
+ ServerName ahs.scitec.kobe-u.ac.jp
+ ServerAlias www.ahs.scitec.kobe-u.ac.jp
+ ErrorLog "/var/log/httpd-error.log"
+ CustomLog "/var/log/httpd-access.log" combined
+ <IfModule mod_rewrite.c>
+ RewriteEngine On
+ RewriteLog "/var/log/httpd-rewrite.log"
+ RewriteLogLevel 0
+ RewriteCond %{SERVER_PORT} !^443$
+ # ---- gate
+ RewriteRule ^/~gate/(.*)?$ https://epa.scitec.kobe-u.ac.jp/~gate/$1 [L,R,NE]
+ RewriteRule ^/cgi-bin/(.*)?$ https://epa.scitec.kobe-u.ac.jp/cgi-bin/$1 [L,R,NE]
+ </IfModule>
+</VirtualHost>
+# ---- cps ----
+<VirtualHost *:80>
+ ServerAdmin epaadmin_at_epa.scitec.kobe-u.ac.jp
+ DocumentRoot "/home/cps/public_html"
+ ServerName cps.scitec.kobe-u.ac.jp
+ ErrorLog "/var/log/httpd-error.log"
+ CustomLog "/var/log/httpd-access.log" combined
+ <IfModule mod_rewrite.c>
+ RewriteEngine On
+ RewriteLog "/var/log/httpd-rewrite.log"
+ RewriteLogLevel 0
+ RewriteCond %{SERVER_PORT} !^443$
+ # ---- gate
+ RewriteRule ^/~gate/(.*)?$ https://epa.scitec.kobe-u.ac.jp/~gate/$1 [L,R,NE]
+ RewriteRule ^/cgi-bin/(.*)?$ https://epa.scitec.kobe-u.ac.jp/cgi-bin/$1 [L,R,NE]
+ </IfModule>
+</VirtualHost>
+# ---- itpass ----
+<VirtualHost *:80>
+ ServerAdmin epaadmin_at_epa.scitec.kobe-u.ac.jp
+ DocumentRoot "/home/itpass/public_html"
+ ServerName itpass.scitec.kobe-u.ac.jp
+ ErrorLog /var/log/httpd-error.log
+ CustomLog /var/log/httpd-access.log combined
+ <IfModule mod_rewrite.c>
+ RewriteEngine On
+ RewriteLog "/var/log/httpd-rewrite.log"
+ RewriteLogLevel 0
+ RewriteCond %{SERVER_PORT} !^443$
+ # ---- gate
+ RewriteRule ^/~gate/(.*)?$ https://epa.scitec.kobe-u.ac.jp/~gate/$1 [L,R,NE]
+ RewriteRule ^/cgi-bin/(.*)?$ https://epa.scitec.kobe-u.ac.jp/cgi-bin/$1 [L,R,NE]
+ </IfModule>
+</VirtualHost>
ログローテートの設定
/etc/logrotate.conf を編集して圧縮オプションを追加する. (compressのコ メントアウトを外す).
/etc/logrotate.d/ 以下に apache2 というファイルを置き, 以下の 内容を書き込む.
/var/log/httpd-access.log {
missingok
rotate 12
postrotate
/usr/bin/killall -HUP httpd 2> /dev/null || true
endscript
}
/var/log/httpd-error.log {
missingok
rotate 12
postrotate
/usr/bin/killall -HUP httpd 2> /dev/null || true
endscript
}
/var/log/httpd-ssl-access.log {
missingok
rotate 12
postrotate
/usr/bin/killall -HUP httpd 2> /dev/null || true
endscript
}
/var/log/httpd-ssl-error.log {
missingok
rotate 12
postrotate
/usr/bin/killall -HUP httpd 2> /dev/null || true
endscript
}
SSL 用の証明書の作成
openssl の設定を変更
# vi /etc/ssl/openssl.cnf [usr_cert] セクションの nsCertType=server のコメントを外す [v3_ca] セクションの nsCertType=sslCA,emailCA のコメントを外す.
証明書を作成する.
# cd /usr/local/apache2/conf # /usr/lib/ssl/misc/CA.sh -newca CA certificate filename: (空で Enter) Enter PEM pass phrase: (適当な文字列入力. 後で消す) Country Name (2 letter code) [AU]: JP State or Province Name [Some-State]: Hyogo Locality Name (eg, city) []: Kobe Organization Name (eg, company) []: Kobe University Organizational Unit Name (eg, section) []: EPA lab. Common Name: epa.scitec.kobe-u.ac.jp Email Address: epaadmin_at_epa.scitec.kobe-u.ac.jp A challenge password: (空で Enter) A optional company name: (空で Enter) Enter pass phrase for ./demoCA/private/./cakey.pem: (適当な文字列入力. 後で消す)
パスフレーズを消す. 問われるパスフレーズには空文字を与える.
# openssl rsa -in ./demoCA/private/cakey.pem -out ./demoCA/private/cakey.pem
証明書の作成.
# openssl x509 -in ./demoCA/cacert.pem -out ./demoCA/server.crt
ブラウザに登録されるバイナリ DER フォーマットで記述された ファイルの作成.
# openssl x509 -inform pem -in ./demoCA/cacert.pem -outform der -out ./demoCA/ca.der
これらの作業により, demoCA 以下に server.crt と ca.der が作成される. これらのファイルをカレントディレクトリである /usr/local/apache2/conf 以下にコピーする.
# cp demoCA/server.crt . # cp demoCA/ca.der .
server.key を demoCA/private/cakey.pem からコピーする.
# cp demoCA/private/cakey.pem ./server.key
これで鍵の作成は完了である.
動作チェック
apache は /usr/local/apache2/bin/apachectl で起動/停止する. 以下のコマンドで apache を起動する.
# /usr/local/apache2/bin/apachectl -k start
停止するには以下のようにすると良い
# /usr/local/apache2/bin/apachectl -k graceful-stop
起動スクリプトを用意する
サーバの起動時に自動的に起動させるため, apache2 の起動スクリプト を用意する.
Debian の apache パッケージに含まれる/etc/init.d/apache を元に 起動スクリプトを apache2 用に多少書き換えたものが apache2 から入手できる. このファイルを /etc/init.d/apache2 にコピーし, 以下のようにパーミッションを設定する.
# wget http://epa.scitec.kobe-u.ac.jp/~itpass/epa/apache/apache2 # cp apache2 /etc/init.d/ # chown root:root /etc/init.d/apache2 # chmod 755 /etc/init.d/apache2
なお, この実行ファイル apache2 には冒頭部に httpd.conf や apachectl ファイルのパスを設定する箇所がある. インストールの場所が変更される場合にはこれも変更すること.
ランレベルごとに apache2 の動作を設定する.
# update-rc.d apache2 defaults
サーバを再起動し, 起動時に apache が起動することを確認する.
補足事項
ロード済みモジュールの表示
以下のように httpd コマンドに -M オプションをつけて実行することで, 静的にロードされたモジュールと動的にロードされたモジュールの両方が 表示される.
$ /usr/local/apache2/bin/httpd -M
以下のように -l オプションを指定すると, 組み込みモジュールのリストが 表示できる.
$ /usr/local/apache2/bin/httpd -l
参考資料
- 平衡点 -- equilibrium point -- > [comp][debian] apache2 + ssl
- EP WWW サーバ構築ログ (ログローテートに関して)
- apxsでapacheにモジュールを追加する
- @IT > Linux Square > Apacheの基本インストール
- @IT > Linux Square > Apache 2.2でWebサイトをパフォーマンスアップ!
- SSL-Webサーバー-CA公開カギを準備する
- OpenSSLでの自己認証局(CA)と自己証明書の作成
- apache2.2 インストール
- パソコンおやじ -- HTTPでアクセスした時、自動的にHTTPSにrewriteする方法
- SquirrelMailの導入
- Apache 2.0 Documentation -- mod_rewrite
[EPAサーバ構築ドキュメント へ戻る]
Keyword(s):
References:[[EPA2008]2008年度後期サーバ構築ログ] [[EPA2008b]EPAサーバのHiki 領域に関する設定] [[EPA2008b]Hikiのページ毎の基本設定] [[EPA2008b]gate-toroku-systemのインストールと設定]